Troubleshooting and notifications
R&S
®
SMB100B
583User Manual 1178.3711.02 ─ 08
2. Select "RF Assembly".
The dialog lists the RF hardware components that are installed on the
R&S SMB100B.
Proceed the same way to get information for instance on general or baseband hard-
ware modules, or on the operating times of the R&S SMB100B in the corresponding
tab.
13.7.4 How to request the data sheet
You can access data sheet-related information vie the LXI web browser, see Chap-
ter 11.6.2.3, "Datasheet", on page 314.
13.8 Collecting information for technical support
If you encounter problems that you cannot solve yourself, contact your
Rohde & Schwarz support center at www.rohde-schwarz.com/support. Our support
center staff is optimally trained to assist you in solving problems.
The support center finds solutions more quickly and efficiently if you provide them with
information on the instrument and an error description.
●
The following dialog boxes in the "Setup > Instrument Assembly" menu provide
useful information:
– Hardware Configuration: hardware assemblies
Collecting information for technical support
To Next Page
Loading...
