Transporting
R&S
®
SMB100B
586User Manual 1178.3711.02 ─ 08
14 Transporting
Lifting and carrying
See:
●
"Lifting and carrying the product" on page 19
●
Chapter 3.1.1, "Lifting and carrying", on page 23
Packing
Use the original packaging material. It consists of antistatic wrap for electrostatic pro-
tection and packing material designed for the product.
If you do not have the original packaging, use similar materials that provide the same
level of protection. You can also contact your local Rohde & Schwarz service center for
advice.
Securing
When moving the R&S SMB100B in a vehicle or using transporting equipment, make
sure that the R&S SMB100B is properly secured. Only use items intended for securing
objects.
Transport altitude
The maximum transport altitude without pressure compensation is specified in the data
sheet.
To Next Page
Loading...
