Rohde & Schwarz R&S SMB100B - Page 597

Maintenance, storage and disposal
R&S
®
SMB100B
597User Manual 1178.3711.02 ─ 08
● To return to the "Check Front Panel" dialog, press [Esc].
Terminating the test
► Press the [Esc] key.
Exits the "Check Front Panel" dialog.
Debugging
1. If you detect a malfunction, for example, when you press the front panel key for the
first time, and the color of the button in the dialog turns red (instead of green), the
front panel key has probably stuck.
2. Contact the Rohde & Schwarz customer support, see Chapter 13.8, "Collecting
information for technical support", on page 583.
15.3.4 FPGA/uC update settings
Access:
► Select "System Config > Setup > Maintenance > FPGA/µC Update".
Performing maintenance tasks