5. IP Network Interfaces
ROX™ v2.2 User Guide 85 RuggedBackbone™ RX5000
4. Click Commit.
5. Click Exit Transaction.
To set ProxyARP for a static or dynamic interface, follow the procedure below.
Procedure 5.9. Setting ProxyARP
1. Go into Edit Private mode.
2. Go to interface/eth/(port}. The Routable Ethernet Ports form appears.
3. In the ProxyARP field, click Enabled.
4. Click Commit.
5. Click Exit Transaction.
To Next Page
Loading...
Need help?
General
