spadmin@10.10.200.5's password: admin123
You are now presented with boot up text and/or a “>” prompt which allows the
use of the Safran command line interface.
Creating an SSH session using Public Key with Passphrase Authentic-
ation for the admin account
You must first provide the secure Safran product a RSA public key found typ-
ically in the OpenSSH id_rsa.pub file. Then you may attempt to create an SSH ses-
sion.
ssh -i ./id_rsa spadmin@10.10.200.5
Enter passphrase for key './id_rsa': mysecretpassphrase
Please consult the SSH client tool’s documentation for specifics on how to use
the tool, select SSH protocols, and provide user private keys.
Secure File Transfer Using SCP and SFTP
VersaSync provides secure file transfer capabilities using the SSH client tools
SCP and SFTP. Authentication is performed using either Account Passwords or
Public Key with Passphrase.
Example output from OpenSSH, SCP, and SFTP client commands are shown
below.
Perform an SCP file transfer to the device using Account Password
authentication
scp authorized_keys scp@10.10.200.5:.ssh
spadmin@10.10.200.135's password: admin123
publickeys 100%
|***************************************************| 5 00:00
Perform an SCP file transfer to the device using Public Key with Pass-
phrase authentication.
scp -i ./id_rsa spadmin@10.10.200.5:.ssh
Enter passphrase for key './id_rsa': mysecretpassphrase
publickeys 100%
|***************************************************| 5 00:00
2.8 Configuring Network Settings
CHAPTER 2 • VersaSync User Manual Rev. 12
95
To Next Page
Loading...
