Safran VersaSync - Resetting the Unit to Factory Configuration

3. In the Actions panel, click Apply License File.
4. In the Apply License File window, click Upload New File.
5. In the Upload File window, click Choose File. Using the Explorer window,
navigate to the location mentioned under the first step, select the license
file, and monitor the installation progress in the Status Upgrade window
until the application has rebooted.
6. Refresh the browser window, and login to the Web UIagain. Re-navigate to
Tools > Upgrade/Backup, and confirm that the newly installed Option is lis-
ted in the System Configuration panel.
4.8 Resetting the Unit to Factory Configuration
In certain situations, it may be desired to reset all VersaSync configurations back
to the factory default configuration. The GNSS location, any VersaSync con-
figurations and the locally stored log files can be cleared via the Web UI.
Note: Restoring configurations (reloading a saved configuration),
erasing the stored GNSS location and clearing the log files are sep-
arate processes. You may restore one without restoring the others.
If VersaSync was assigned a static IP address before cleaning the configurations,
it will be reset to DHCP after the clean has been performed. If no DHCP server is
available after the clean operation, the static IP address will need to be manually
reconfigured.
4.8 Resetting the Unit to Factory Configuration
CHAPTER 4 • VersaSync User Manual Rev. 12
293