4.8.2.3 Uploading Configuration Files
To upload configuration files from a PC:
1. Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2. In the Actions panel, click the Upload Configuration button.
3. Click Choose File in the window that displays, and navigate to the directory
on your PC where the bundled file is stored.
4. Click the Upload button. VersaSync saves the uploaded bundled file in the
/home/spectracom/xfer/config/directory.
Note: When uploading files remotely via long distances, or
when uploading multiple files via several browser windows sim-
ultaneously, the upload process may fail to complete. In this
case, cancel the upload by clicking X, and go back to Step2.
5. To use the new configuration file for this VersaSync, click the Restore Con-
figuration button, and follow the procedure described under "Restoring the
System Configuration" below.
4.8.2.4 Restoring the System Configuration
To restore the System Configuration:
1. Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2. In the Actions panel, click Restore Configuration.
298
CHAPTER 4 • VersaSync User Manual Rev. 12
4.8 Resetting the Unit to Factory Configuration
To Next Page
Loading...
