Safran VersaSync - General Network Settings

SSH: This button takes you to the SSH Setup window. For details on
setting up SSH, see "SSH" on page88.
System Time Message: Setup a once-per-second time message to be
sent to receivers via multicast. For details, see "System Time Mes-
sage" on page107.
VLAN: This button will reveal the VLAN Setup popup window. For
more information, see "VLAN Support" on page106.
HTTPS: This button takes you to the HTTPS Setup window. For
details on setting up HTTPS, see "HTTPS" on page78.
The Network Services panel is used to enable (ON) and disable (OFF) net-
work services, as well as the Web UI display mode, details see: "Network
Services" on page75.
The Ports panel not only displays STATUS information, but is used also to
set up and manage VersaSync’s network ports via three buttons:
INFO button: Displays the Ethernet port Status window for review
purposes.
GEAR button: Displays the Ethernet port settings window for editing
purposes.
TABLE button: Displays a window that allows adding, editing, and
reviewing Static Routes.
2.8.1 General Network Settings
To expedite network setup, VersaSync provides the General Settings window,
allowing quick access to the primary network settings.
To access the General Settings window:
1. Navigate to MANAGEMENT > Network Setup. In the Actions Panel on the
left, click General Settings.
2. Populate the fields:
Hostname: This is the server’s identity on the network or IP address.
72
CHAPTER 2 • VersaSync User Manual Rev. 12
2.8 Configuring Network Settings