Safran VersaSync - SAFETY: User Responsibilities

DANGER! — INSTALLATION OF EQUIPMENT:
Installation of this product is to be done by authorized service per-
sonnel only.This product is not to be installed by users/operators
without legal authorization.
Installation of the equipment must comply with local and national
electrical codes.
DANGER! — DONOTOPENEQUIPMENT, UNLESSAUTHORIZED:
The interior of this equipment does not have any user serviceable
parts. Contact Orolia Technical Support if this equipment needs to
be serviced. Do not open the equipment. Follow Orolia Safety
Instructions, and observe all local electrical regulatory requirements.
Caution: Electronic equipment is sensitive to Electrostatic Discharge
(ESD). Observe all ESD precautions and safeguards when handling
equipment.
2.1.2 SAFETY: User Responsibilities
The equipment must only be used in technically perfect condition. Check
components for damage prior to installation. Also check for loose or
scorched cables on other nearby equipment.
Make sure you possess the professional skills, and have received the train-
ing necessary for the type of work you are about to perform.
Do not modify the equipment.
Use only spare parts authorized by Orolia.
Always follow the instructions set out in this User Manual , or in other Orolia
documentation for this product.
Observe generally applicable legal and other local mandatory regulations.
2.1 SAFETY
CHAPTER 2 • VersaSync User Manual Rev. 12
29