Safran VersaSync - Spectracom Format 9

D Daylight Saving Time indicator (S,I,D,O)
XX Time Zone Switch Setting (±00…12)
The leading edge of the first character (CR) marks the on-time point of the data
stream. Time sync status character (I) is described below:
(Space) When
VersaSync
is synchronized to UTC source.
* When
VersaSync
time is set manually.
? When
VersaSync
has not achieved or has lost synchronization to UTC source.
The time and date can be set to either local time or UTC time, depending upon
the configuration of the output port.
5.3.13 Spectracom Format 9
Format 9 provides Day-of-Year and Time information.
E x a m p l e m e s s a g e :
<SOH>DDD:HH:MM:SSQ<CR><LF>
Where:
SOH Start of header (ASCII Character 1)
DDD Day of Year (001-366)
: Colon Separator
HH Hours (00-23)
MM Minutes (00-59)
SS Seconds (00-59) (00-60 for leap second)
Q Time Sync Status [as INPUT]
space = SYNC
‘.’ = SYNC
‘*’=NOT IN SYNC
‘#’ = NOT IN SYNC
“?” = NOT IN SYNC
VersaSync User Manual 359
APPENDIX