To restore the default I/O pin configuration:
A. Navigate to the MANAGEMENT: NETWORK > Pin Layout screen.
B. In the Actions panel on the left, click Restore Default Layout.
Reloading the Current I/O Configuration
To reload the currently used I/O configuration after adding pin layout changes,
but before clicking Apply Changes:
A. Navigate to the MANAGEMENT: NETWORK > Pin Layout screen.
B. In the Actions panel on the left, click Reload Layout.
2.7.2 Configure I/O Settings
Note: Illustrations shown below are examples; the windows dis-
played in your Web UI may look differently.
2.7.2.1 How to Configure an Input Reference
To access the user-editable settings of an Input Reference, choose one of these
two methods:
Configuring the settings of an input reference, method 1:
48
CHAPTER 2 • VersaSync User Manual Rev. 12
2.7 Configuring Inputs/Outputs
To Next Page
Loading...
