3. Click the ON/OFF toggle under Enable RADIUS to enable or disable the fea-
ture.
4. If you are enabling the service, in the Retransmit Attempts field, select the
number of retries for VersaSync to communicate with the RADIUS server
(default = 0).
5. Configure the Default User Group to select your preferred default user per-
missions level (Admin or User)
6. Click Submit.
4.4.5.2 Adding/Removing a RADIUS Server
To add a RADIUSauthentication server, or remove a server from the list:
258
CHAPTER 4 • VersaSync User Manual Rev. 12
4.4 Managing Users and Security
To Next Page
Loading...
