System Log
Displays log entries related to the Timing System events and daemon events
(such as the Alarms, Monitor, Notification, or SNMP daemons starting or stop-
ping, etc.)
Timing Log
Displays log entries related to Input reference state changes (for example, IRIG
input is not considered valid), antenna cable status. Examples include:
GRGR = GNSS Reference
1
antenna fault: The GNSS Antenna Problem alarm
indicates the GNSS receiver has detected an over-current or undercurrent
condition (an open or short exists in the GNSS antenna cable, or the GNSS
antenna is not connected to VersaSync). The receiver will attempt to con-
tinue the normal acquisition and tracking process regardless of the antenna
status.
GR antenna ok: The antenna coax cable was connected at this time or an
open or short in the antenna cabling was occurring but is no longer being
detected.
Update Log
Displays log entries related to software updates that have been performed.
4.6.2.2 The Logs Screen
The Logs Screen provides access to settings that apply to all logs.
To access the Logs Screen:
1. Navigate to MANAGEMENT > OTHER: Log Configuration.
2. The Logs screen will appear, with several panels:
1
GR = GNSS Reference
4.6 Quality Management
CHAPTER 4 • VersaSync User Manual Rev. 12
285
To Next Page
Loading...
