7. Verify that the update was successful: Navigate to Tools >
Upgrade/Backup, and confirm the new SW version in the System Con-
figuration panel.
Note: Should you use DHCP, a new IP address may be assigned to
your unit, and you may have to point your web browser to it.
Note: In the event that the update failed, see "Troubleshooting Soft-
ware Update" on page311.
4.7.2 Applying a License File
Software options must be activated by applying a license file (OPT-xyz):
Typically, VersaSync units are shipped with the license file pre-installed, reflect-
ing the system configuration as ordered. If, however, a feature is to be activated
after delivery of the VersaSync unit, please contact your local Safran Sales Office
first to have a license file generated. License files are archive files with a tar.gz
extension. One license file may contain multiple licenses for multiple products.
To apply the license file, you need to upload it into your VersaSync unit and install
it:
1. Save the license file license.tar.gz to a location on your PC (which
needs to be connected to the same network VersaSync is.)
2. Open the VersaSync WebUI, and navigate to Tools > Upgrade/Backup:
292
CHAPTER 4 • VersaSync User Manual Rev. 12
4.7 Updates and Licenses
To Next Page
Loading...
