1. Navigate to INTERFACES > REFERENCES: GNSS Reference.
2. Click on the INFO button, or the GEAR button to configure the GNSS set-
tings, or review GNSS reference status information.
3.3.3.1 Reviewing the GNSS Reference Status
To view the current status of your GNSS reference:
1. Navigate to INTERFACES > REFERENCES: GNSS Reference.
2. Click the INFO button next to GNSS 0. The GNSS 0 status window will dis-
play; it contains two tabs, explained in detail below: Main [= default], and
Satellite Data.
The "Main" tab
3.3 Managing References
CHAPTER 3 • VersaSync User Manual Rev. 12
195
To Next Page
Loading...
