Safran VersaSync - Web UI Timeout

Changing the "spadmin" password via Web UI
To change the spadmin password:
1. Navigate to the MANAGEMENT > OTHER: Authentication window.
2. Locate the spadmin entry in the Users table.
3. Click the CHANGE button.
4. In the Add or Change User window:
1. Enter a new password.
Note: The new password can be from 8 to 32 characters in
length.
2. Confirm the new password.
3. Click Submit.
To reset the "spadmin" account password via the serial port, or SSH:
1. Connect a PC to the USB port, and log in using an account with admin
group rights (such as the spadmin account).
2. Type: resetpw <Enter>. The spadmin account password is now reset.
After resetting the password follow the procedure above to change the spadmin
password in the MANAGEMENT > OTHER: Authentication window.
4.4.3 Web UI Timeout
For security reasons, the WebUI will automatically timeout after a set number of
minutes, i.e. you will be logged out by the system, regardless of activity, and need
to actively login again.
Minimum timeout duration: 10minutes
Maximum timeout duration: 1440 minutes (24hours)
Default timeout duration: 60minutes.
To change the time after which the WebUI will timeout:
4.4 Managing Users and Security
CHAPTER 4 • VersaSync User Manual Rev. 12
249