1. Under INTERFACES > REFERENCES, click the desired reference.
2. The Status window for the specific reference you selected will be displayed. Click
the Edit button in the bottom-left corner.
3. The settings window for the chosen reference will be displayed. Edit the field(s)
as desired.
Configuring the settings of an input reference, method 2:
1. In the INTERFACES > REFERENCES drop-down menu, click REFERENCES
(white on orange), or an input reference category (e.g., "GNSS reference").
2. In the Status window, click the GEAR button next to the desired input reference.
3. The settings window for the chosen reference will be displayed. Edit the field(s)
as desired.
For more information, see "Managing References" on page171.
2.7 Configuring Inputs/Outputs
CHAPTER 2 • VersaSync User Manual Rev. 12
49
To Next Page
Loading...
