or using a DHCP address. For more information, see "Assigning a Static IP
Address" on page41.
Once you have assigned the IP address, login to the Web UI. For more inform-
ation, see "Accessing the WebUI" on page37.
To configure network settings, or monitor your network, navigate to VersaSync's
Network Setup screen.
To access the Network Setup screen:
Navigate to MANAGEMENT > Network Setup. The Network Setup screen is
divided into three panels:
The Actions panel provides:
General Settings: Allows quick access to the primary network set-
tings necessary to connect VersaSync to a network. See General Net-
work Settings.
Web Interface Settings:
Web interface timeout: Determines how long a user can stay
logged on. For more information, see "Web UI Timeout" on
page249.
Access Control: Allows the configuration of access restrictions from
assigned networks/nodes.
Login Banner: Allows the administrator to configure a custom banner
message to be displayed on the VersaSync Web UI login page and
the CLI (Note: There is a 2000 character size limit).
2.8 Configuring Network Settings
CHAPTER 2 • VersaSync User Manual Rev. 12
71
To Next Page
Loading...
