3. The SNMP V3 Settings window will display.
4. Enter the required information in the fields provided.
SNMP User Names and passwords are independent of users that are
configured on the Tools/Users page.
User names are arbitrary. SNMP User Names should be
between 1 and 31 characters in length.
The User Name must be the same on VersaSync and on the
management station.
The Auth Type field provides a choice between MD5 and SHA.
The Auth Password must be between 8 and 32 characters in length.
The Priv Type field provides a choice between AES, DES, and No Pri-
vacy.
The Priv Passphrase must be between 8 and 32 characters in length.
The Permissions field provides a choice between Read/Write and
Read Only.
5. Click Submit. The created user will appear in the SNMP V3 panel
Editing and Deleting Users
To edit or delete a user you have created:
1. Navigate to MANAGEMENT > NETWORK: SNMP Setup.
2. Click the row of the SNMP V3 panel that displays the community you wish
to edit or delete. The cursor will change from an arrow icon to a pointing fin-
ger to indicate that the entry is clickable.
2.8 Configuring Network Settings
CHAPTER 2 • VersaSync User Manual Rev. 12
103
To Next Page
Loading...
