Note: The spfactory account is for use by Safran service per-
sonnel. While the spfactory account can be deleted by an admin-
istrator, it should be noted that this may potentially limit remotely
provided technical support.
User accounts can be created to have either limited user or full administrator
rights. Each user can be assigned his own login password.
To ADD a user account, click the PLUS icon in the top-right corner of the
Users screen.
To DELETE a user account, click the Delete button in that account’s entry
on the Users screen.
To APPLY CHANGES to a user account, click the Change button next to the
desired user account.
When either the Change button or the PLUS icon is clicked, the Add or Change
User window appears:
To add a user account:
1. Enter a Username. (For rules, see "Rules for Usernames" on the previous
page.)
2. Enter a Password. The password requirements are configurable, see
"Managing Passwords" on the next page. By default a password can be any
combination of upper- and lower-case characters. Minimum password
length = 8 characters, maximum length = 32 characters.
3. Repeat the new Password.
4. In the Group field, choose the permission group to which you want the user
to belong to: user or admin. The user permission level assigns permission
to access and change all settings, with the following exceptions that are lim-
ited to the admin accounts:
Changing network settings
Adding and deleting user accounts
Web Interface Settings
Upgrading VersaSync system software
Resetting the VersaSync configuration
Clearing log files
Changing Disciplining Setup options
4.4 Managing Users and Security
CHAPTER 4 • VersaSync User Manual Rev. 12
245
To Next Page
Loading...
