2. Click the Create Certificate Request tab (this is the default tab).
3. Check the box Create Self Signed Certificate, in order to open up all menu
items.
This checkbox serves as a security feature: Check the box only if you are
certain about generating a new self-signed Certificate.
Caution: Once you click Submit, a previously generated Cer-
tificate (or the Safran default Certificate) will be overwritten.
Note that an invalid Certificate may result in denial of access to VersaSync
via the Web UI!
4. Fill in the available fields:
Signature Algorithm: Choose the algorithm to be used from:
MD4
SHA1
SHA256
SHA512
Private Key Pass Phrase: This is the RSA decryption key. This must be
at least 4characters long.
RSA Private Key Bit Length: 2048 bits is the default. Using a lower
number may compromise security and is not recommended.
Two-Letter Country Code: This code should match the ISO-3166-1
value for the country in question.
2.8 Configuring Network Settings
CHAPTER 2 • VersaSync User Manual Rev. 12
81
To Next Page
Loading...
