Samsung OfficeServ 7000 Series - Page 207

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-169
(Continued)
Timer Name Default Range Unit Description
DISA NO ACTION 10 0-250 SEC This timer controls how long a DISA line will
wait for further action from the caller.
DISPLAY DELAY TM 3 1-250 SEC This timer controls how long a display is
shown in the LCD and how long error tone is
heard.
DOOR LOCK RELES. 500 100-2500
MSEC
This timer controls how long the door lock
relay will be activated.
DOOR RING DETECT 50 10-250
MSEC
This timer controls the time before a call is
answered by the door phone.
DOOR RING OFF TM 30 1-250 SEC This timer controls the duration of ringing at
the door ring destination before automatically
cancelling.
E-HOLD RECALL TM 45 0-250 SEC This timer controls how long a call is held
exclusively at a station before recalling.
FIRST DIGIT TIME 10 1-250 SEC This timer controls how long the system will
wait for dialing to begin before dropping the
dial tone and returning the you to error tone.
HOK FLASH MAX TM 120 20-2500
MSEC
This timer monitors the duration of a hook-
switch flash to ensure that the flash is valid
and not a line noise or an accidental
hookswitch bounce LONGEST duration.
HOK FLASH MIN TM 70 20-2500
MSEC
This timer monitors the duration of a hook
switch flash to ensure that the flash is valid
and not a line noise or an accidental hook
switch bounce SHORTEST duration.
HOOK OFF TIME 100 20-2500
MSEC
This timer controls the time before dial tone is
sent to a single line station.
HOOK ON TIME 200 20-2500
MSEC
This timer sets the minimum amount of time that
the system will recognize as an SLT hang up.
INQUIRY RELEASE 30 1-250 SEC This timer monitors the duration of the
interaction of the Soft button to determine
when to return the LCD back to a normal
status. This timer affects only display phones.
INTER DIGIT TIME 10 1-250 SEC This timer controls the grace period between
dialing valid digits before dropping the call and
returning you back to error tone.
ISDN INT DGT TM 7 1-15 SEC This timer controls the grace period between
dialing valid digits and the end of the dialing
string on an ISDN call.