Samsung OfficeServ 7000 Series - Page 452

CHAPTER 2. MMC Programming
2-414
© SAMSUNG Electronics Co., Ltd.
(Continued)
No Code Alarm Name Definition
08 MJA08 FAN Out of Order A FAN does not work.
09 MJA09 FAN Recovery A FAN which did not work starts to operate correctly
before system stops.
10 MJA10 CPU Overload CPU Overload
11 MJA11 CPU Overload
Rec
CPU Overload Recovery
12 MJA12 FLASH FORMAT
Err
FLASH FORMAT Error
13 MJA13 Invalid MMC Halt An Invalid MMC card has inserted in SYSTEM.
So system is halted.
14 MJA14 DUAL PWR Error Dual Power Error alarm
15 MJA15 DUAL PWR
Recovry
Dual Power recovery alarm
16 MJA16 D-PWR FAN
Error
Dual Power FAN Error alarm
17 MJA17 D-PWR FAN
Recov
Dual Power FAN recovery alarm
18 MJA18 PoE PWR Error PoE Power Error alarm
19 MJA19 PoE PWR
Recovry
PoE Power recovery alarm
20 MJA20 PoE FAN Error PoE Power FAN Error alarm
21 MJA21 PoE FAN
Recovry
PoE Power FAN recovery alarm
22 MJA22 PoE Battry Error PoE Power Battery Error alarm
23 MJA23 PoE Battry Recov PoE Power Battery recovery alarm
24 MJA24 MAIN PWR Error PoE Power Battery Error alarm
25 MJA25 MAIN PWR
Recovry
PoE Power Battery recovery alarm
25 MJA26 MEDIA NOT
UMOUNT
Media Card Out without dismounted
- MJA27 SYS Overheat System Overheat alarm
- MJA28 SYS High Temp System High Temperature alarm
- MJA29 SYS Normal
Temp
System Normal Temperature alarm
- MJA30 PCM SW Init Fail PCM Switch initial fail alarm
- MJA31 PCM SW Init Rec PCM Switch initial recovered alarm
- MJB-- LCP/TASK Error LCP or TASK Fault