Transponder
7.23 MDS D521
SIMATIC RF200
278 System Manual, 07/2015, J31069-D0227-U001-A9-7618
Mounting information for adhesion
● Drill installation hole
● The adhesive surfaces must be dry, free from dust, oil, stripping agents and other
impurities
● Apply adhesive according to the manufacturer's processing instructions
● Press in MDS D521 using your finger; antenna side to the outside (see figure "Flush-
mounting of MDS D521 in metal with tools")
● Remove residues of adhesive
● Allow to cure according to the manufacturer's instructions
● Flush-mounting of MDS D521 in metal with tools
Figure 7-60 Installation example of MDS D521 in a steep cone
Figure 7-61 Installation example of MDS D521 in a stud bolt
To Next Page
Loading...
