Siemens SIMATIC Ident System Manual

RF200 system planning
4.3 Installation guidelines
SIMATIC RF200
58 System Manual, 07/2015, J31069-D0227-U001-A9-7618
Transponder
Reader without
direct
metal influence
Reader on
metal
(metal plate)
Reader flush-
mounted in metal
(all round
20 mm)
MDS D424
1)
without metal
100
85
80
on metal, distance 15 mm 90 80 75
flush-mounted in metal;
distance all round 25 mm
80 70 65
MDS D425
without metal 100 90 85
on metal, distance 0 mm
95
85
80
MDS D426
1)
without metal
100
80
70
on metal, distance 25 mm
90
80
70
flush-mounted in metal;
Distance all-round 50 mm
85 65 60
MDS D428
without metal
100
90
85
on metal, distance 0 mm
95
85
83
MDS D460
1)
without metal
100
90
80
on metal, distance 0 mm
90
85
80
MDS D522
metal-free
100
90
85
flush-mounted in metal;
distance all round 0 mm
90 60 40
MDS D522
Special vari-
ant
metal-free
100
90
85
flush-mounted in metal;
distance all round 0 mm
90 60 40
MDS D524
1)
metal-free
100
85
80
on metal, distance 0 mm
90
80
75
flush-mounted in metal;
distance all round 0 mm
80 70 65
MDS D526
1)
metal-free
100
80
70
on metal, distance 25 mm
90
80
70
flush-mounted in metal;
distance all round 50 mm
85 65 60
MDS D528
metal-free
100
90
85
on metal, distance 0 mm
95
85
83
1)
Mounting the transponder on or in metal is only possible with the appropriate spacer or if there is
adequate clearance to the metal.
2)
Values of > 100 % related to non metal surroundings can occur if transponders were developed
specifically for mounting in/on metallic surroundings.

Siemens SIMATIC Ident Specifications

General

Brand	Siemens
Model	SIMATIC Ident
Category	Other
Language	English