6 — Cycle and Control Value Programming
92
920515770_J
Vision® 1300 Series
Operator Manual
1. Supervisors
• To Add, Edit or Delete Supervisors Login Names and Passwords (see Section 6.16, Supervisor Menu — Reservoirs).
2. Cycles
• To Create Customized Cycles and to Modify Validated Cycles (see Section 6.11, Copying/Creating a Customized
Cycle and Section 6.10, Modifying a Validated Cycle).
3. Print
• To Print Values of a Specific Cycle or Values of all Cycles (see Section 6.15, Supervisor Menu — Print).
4. Machine Setup
• (see Section 6.14, Supervisor Menu — Machine Setup)
• To Activate or Deactivate:
– Printer;
– Printing to .pdf:
– Extended Cycle Printout;
– Guaranteed Temperature for Wash Phase;
– Supervisor Password for Door Opening After Abort.
• To Set:
– Date and Time Format;
– Temperature, Pressure and Injection Rate Units.
.
To Next Page
Loading...
