Steris Vision 1321 - Component Identification

4 — Component Identification
16
920515770_J
Vision® 1300 Series
Operator Manual
Component Identification
4.1 Component Identification — Introduction
IMPORTANT: A listing of the Safety Precautions to be observed when operating and servicing this equipment can be found in
Safety Precautions section of this manual. Do not operate the equipment until you have become familiar with this information.
4.2 Washer/Disinfector — General
Before operating the Vision® 1321 Cart and Utensil Washer/Disinfector, the Vision® 1327 Cart and Utensil
Washer/Disinfector and the Vision® 1330L Cart and Utensil Washer/Disinfector, it is important to become familiar with
the location and function of all major components and controls.
1. Chamber Door
2. Service Compartment (Encloses Mechanical Cores, see
Section 4.9, Mechanical Cores)
.