EasyManua.ls Logo

Steris Vision 1321 - Reservoirs

Steris Vision 1321
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Component Identification
21
Operator Manual
Vision® 1300 Series
920515770_J
1. Air Heat Exchanger System
2. Water and Steam Piping
3. Water Heat and Exchanger System
4. Electrical Box
5. Chemical Dispersing Devices
6. Reservoirs
.
4.10 Reservoirs
Two reservoirs (thermal rinse and wash) are included with the washer/disinfector and a third one (wash) is available as
an option. Reservoirs are located on the mechanical core.
The reservoirs store the water that is recirculated on the load through the traveler spray arm assemblies during the
cycle. The thermal rinse reservoir is heated to maximize the global output of the washer/disinfector.
Each reservoir is dedicated to a type of detergent:
Reservoir 1 (Thermal Rinse):Rinse Aid Agent
Reservoir 2 (Wash):Alkaline or Neutral Detergent
Reservoir 3 (Wash - Option):Alkaline or Neutral Detergent

Table of Contents

Related product manuals