EasyManua.ls Logo

Steris Vision 1321 - Alarm #13: Water Recirculation Too Long to Heat; Alarm #14: Water Recirculation RTD Defective

Steris Vision 1321
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 Routine Maintenance
153
Operator Manual
Vision® 1300 Series
920515770_J
1 Rotary Spray Arm Assembly
2 Pin
.
11. Repeat procedure for each rotary spray arm on rack.
7.11 Emergency Stop Cables
WARNING
PERSONAL INJURY AND/OR EQUIPMENT DAMAGE HAZARD
Before servicing or cleaning washer/disinfector, always turn LOCK/UNLOCK key selector
to LOCK position to prevent cycle operation. Keep the key on yourself.
WARNING
PERSONAL INJURY HAZARD
Always verify door bridge is down before entering washer/disinfector chamber.
Keep hands and fingers away from door or any moving parts to prevent crushing.
Verify emergency stop cables as follows:
1. Press Open/Close door on load side touch screen to open load door.
2. Use key to turn LOCK/UNLOCK selector to LOCK position to lock washer/disinfector.
IMPORTANT: Retain key while inside chamber.
3. Enter washer/disinfector chamber and pull one emergency stop cable.

Table of Contents

Related product manuals