EasyManua.ls Logo

Steris Vision 1321 - Chamber Doors; Chamber - General

Steris Vision 1321
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Component Identification
17
Operator Manual
Vision® 1300 Series
920515770_J
4.3 Chamber Doors
The chamber is provided with a horizontally-sliding power door on the load and unload side to access chamber. Doors
are automatically operated by pneumatic cylinders. Doors are made of double tempered glass to allow the operator to
view the chamber interior while a cycle is in progress and remain safely cool to the touch at any time during a cycle.
The doors are pressed against a silicone gasket to ensure complete air and water tightness of the washer/disinfector
chamber.
The doors are equipped with an obstruction monitoring system and a door interlock safety control.
4.4 Chamber General
The high-quality stainless-steel chamber is insulated to reduce heat loss and noise level as well as to improve thermal
profile. Two LED lights illuminate the chamber interior.

Table of Contents

Related product manuals