Steris Vision 1321 - Noisy Drying Fan; Noisy exhaust fan; Paper is not taken up into paper takeup; Phase stops for no apparent reason

8 — Troubleshooting
192
920515770_J
Vision® 1300 Series
Operator Manual
8.81 Noisy Drying Fan
Condition
Noisy drying fan.
General Troubleshooting
Additional Information
Drying fan not operating properly.
1. Contact STERIS.
8.82 Noisy exhaust fan
Condition
Noisy exhaust fan.
General Troubleshooting Additional Information
Exhaust fan not operating properly.
1. Contact STERIS.
8.83 Paper is not taken up into paper takeup
Condition
Paper is not taken up into paper takeup.
General Troubleshooting Additional Information
Printer motor or roller defective.
1. Contact STERIS.
8.84 Phase stops for no apparent reason
Condition
Phase stops for no apparent reason.
General Troubleshooting
Additional Information
Cycle needs to be aborted.
1. Abort cycle and start a new cycle.
2. If situation reoccurs, contact STERIS.