Steris Vision 1321 - Nameplate Symbols

2 — Symbols and Labels
6
920515770_J
Vision® 1300 Series
Operator Manual
Table 2-1. Definition of Symbols on Equipment (continued)
Symbol
Definition
Risk of Pinching Fingers or Hands.
Maximum height of cart(s) for processing CART LOW ECO cycle.
2.2 Nameplate Symbols
The table below contains symbols which may be on the identification nameplate of your equipment:
Table 2-2. Definition of Symbols
Symbol
Definition
Model of Equipment.
Serial Number of Equipment.
Unique Device Identification.
Year of Manufacture of the Equipment.
Safe Disposal of the Device — Refer to Instruction for Use.
Medical Device.
Power Rating of Processor: Voltage, Frequency (Hertz), Type of Supply.