Steris Vision 1321 - Doors Do Not Open Completely; Doors Open And;Or Close too Quickly; Doors Open And;Or Close too Slowly And;Or Vibrate; Excessive Vapor Exhausting from Chamber Vacuum;Pressure Safety Damper

8 — Troubleshooting
186
920515770_J
Vision® 1300 Series
Operator Manual
8.65 Doors do not open completely
Condition
Doors do not open completely.
General Troubleshooting Additional Information
Doors obstructed.
1. Remove obstruction.
Doors guiding system malfunction.
1. Contact STERIS.
8.66 Doors open and/or close too quickly
Condition
Doors open and/or close too quickly.
General Troubleshooting
Additional Information
Door cylinder flow control incorrectly adjusted
1. Contact STERIS.
8.67 Doors open and/or close too slowly and/or vibrate
Condition
Doors open and/or close too slowly and/or vibrate.
General Troubleshooting Additional Information
Door cable, cylinder and pulley malfunction.
1. Contact STERIS.
8.68 Excessive vapor exhausting from chamber vacuum/pressure safety damper
Condition
Excessive vapor exhausting from chamber vacuum/pressure safety damper.
General Troubleshooting
Additional Information
Building exhaust system not working as per equipment
drawing requirements.
1. Contact STERIS.
Exhaust fan not operating properly,
1. Contact STERIS.