6 — Cycle and Control Value Programming
97
Operator Manual
Vision® 1300 Series
920515770_J
4. Press Modify cycles on touch screen. Display shows Cycles screen:
5. On Cycles screen, press Left or Right arrow to scroll across touch screen to view all cycles open to modification.
6. Select any validated cycle to modify.
7. To set cycle parameters, for example Lock Cycle, press parameter selection touch pad repeatedly to toggle
between available settings.
IMPORTANT: When cycle access is locked, supervisor can still access cycle for modifications in Supervisor mode. Cycle
access is locked in Cycle mode only.
To Next Page
Loading...
