Suzuki Wagon R Plus RB310 - Front Drive Shaft Assembly Construction

4A-2 FRONT DRIVE SHAFT (G10/M13 ENGINES)
On-Vehicle Service
Front Drive Shaft Assembly Construction
1. Transaxle 7. Oil filler/level plug
: Apply sealant 99000-31260 to plug thread
13. Drive shaft washer
2. Drive shaft assembly 8. Oil drain plug
: Apply sealant 99000-31260 to plug thread
14. Center bearing support
3. Tie-rod end 9. Tie-rod end nut 15. Center shaft
4. Suspension control arm 10. Ball stud bolt 16. Center bearing support bolts
5. Stabilizer 11. Drive shaft nut Do not reuse.
6. Stabilizer mount bracket bolt 12. Wheel bolt Tightening torque