MANUAL TRANSAXLE (M13 ENGINE) 7A2-17
Gear Shift and Select Shaft Assembly Components
1. Transaxle right case 11. VSS
2. Transaxle left case
: Apply sealant 99000-31260 to mating surface of left case and
right case.
12. Oil gutter bolt
: Apply thread lock 99000-32110 to all around thread part of bolt.
3. Gear shift and select shaft assembly 13. Left case plate screw and bolts
4. Transaxle left case plate 14. VSS bolt
5. Transaxle side cover
: Apply sealant 99000-31260 to mating surface of side cover
and left case.
15. Side cover bolt No.1
6. Back up lamp switch 16. Side cover bolt No.2
7. O-ring 17. Transaxle case bolt
8. Differential assembly Tightening torque
9. Oil level/filler plug
: Apply sealant 99000-31260 to all around thread part of plug.
Do not reuse.
10. Oil drain plug
: Apply sealant 99000-31260 to all around thread part of plug.
Apply transaxle oil
1. Gear shift & select shaft 6. Select cable lever 11. Select lever shaft bush
: Apply grease 99000-25010 to whole area of
bush.
2. 5th & reverse gear shift cam 7. Guide case bolt No.1
: Apply sealant 99000-31260 to bolt thread.
12. Select lever boss
: Apply grease 99000-25010 to internal and
external diameter
3. Gear shift interlock plate 8. 5th to reverse interlock guide bolt
: Apply sealant 99000-31260 to bolt thread.
Tightening torque
4. Gear shift & select lever 9. Gear shift interlock bolt
: Apply sealant 99000-31260 to
bolt thread.
Do not reuse.
5. Shift cable lever 10. Guide case Apply transaxle oil.
To Next Page
Loading...
