7B1-168 AUTOMATIC TRANSAXLE (M13 ENGINE)
Countershaft assembly
Disassembly
1) Remove countershaft LH bearing (1) and reduction driven
gear (2) at once by using special tool and hydraulic press.
Special tool
(A): 09925-98221
2) Remove countershaft RH bearing (1) by using special tools.
Special tool
(A): 09913-61510
(B): 09926-58010
1. Countershaft RH bearing 5. Bearing cap
2. Countershaft 6. Countershaft bearing shim
3. Countershaft LH bearing Apply automatic transaxle fluid.
4. Reduction driven gear Do not reuse.
To Next Page
Loading...
