Suzuki Wagon R Plus RB310 - Oil Pan Bolt; Fluid Outlet Union; Fluid Cooler Pipe Bolt; Fluid Filler Tube Bolt

AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-199
77) Install oil cleaner magnets (1) in oil pan (2).
78) Install new oil pan gasket (1) between transaxle case and oil
pan (2).
Tightening torque
Oil pan bolt
(a): 7.0 N·m (0.7 kg-m, 5.0 lb-ft)
79) After applying A/T fluid to new O-ring, fit it to fluid inlet union
(1). Then install fluid outlet union to transaxle case.
Tightening torque
Fluid outlet union
(a): 25 N·m (2.5 kg-m, 18.0 lb-ft)
80) Install new gasket (2) and then install fluid cooler pipes.
Tightening torque
Fluid cooler pipe bolt
(b): 22 N·m (2.2 kg-m, 16.0 lb-ft)
Fluid cooler pipe bracket bolt
(c): 10 N·m (1.0 kg-m, 7.5 lb-ft)
81) After applying A/T fluid to new O-ring, fit it to fluid filler tube.
Then install fluid filler tube to transaxle case.
Tightening torque
Fluid filler tube bolt
(d): 10 N·m (1.0 kg-m, 7.5 lb-ft)
NOTE:
If metal particles are attached to the magnets, clean them
before installing.
(c)
(d)
(b)
2
1,(a)
(b)
2