6A2-42 ENGINE MECHANICAL (M13 ENGINE)
Oil Pump Inspection
Oil seal
• Check oil seal lip for fault or other damage. Replace as nec-
essary.
Special tool
(A): 09913-75810
Drive in dimension
“a”: 1.5 mm (0.06 in.)
Oil pump assembly
• Check outer (1) and inner rotors (2), rotor plate, and oil pump
case for excessive wear or damage.
• Check relief valve (1) for excessive wear or damage and
operates smoothly.
NOTE:
When installing new oil seal (1), press-fit it to oil pump
case (2) by using special tool as shown in the figure.
“a”
To Next Page
Loading...
