MAINTENANCE AND LUBRICATION 0B-3
Maintenance Schedule
Maintenance Schedule Under Normal Driving Conditions
NOTE:
• This interval should be judged by odometer reading or months, whichever comes first.
• This table includes service as scheduled up to 90,000 km (54,000 miles) mileage. Beyond 90,000 km
(54,000 miles), carry out the same services at the same intervals respectively.
Interval
Km (x 1,000) 15 30 45 60 75 90
Miles (x 1,000) 9 18 27 36 45 54
Months 12 24 36 48 60 72
ENGINE
Drive belt –– I ––R
Camshaft timing belt (G10 engine) Replace every 100,000 km (60,000 miles)
Valve lash (clearance) (M13 engine) – I – I – I
Engine oil and oil filter
When SG, SH, SJ, or SL grade oil
is used.
RRRRRR
Engine coolant – R – R – R
Exhaust system – I – I – I
IGNITION SYSTEM
✱
Spark plugs
When
unleaded
fuel is used
M13 engine Iridium plug
Replace every 105,000 km (63,000 miles) or
84 months
G10 engine ––R ––R
When leaded fuel is used, refer to “Maintenance Recommended Under Severe Driving Cond-
tion” in this section.
Distributor cap and rotor (G10 engine) –– I –– I
FUEL SYSTEM
Air cleaner filter
Paved-road I I R I I R
Dusty conditions
Refer to “Maintenance Recommended
Under Severe Driving Conditions” in this
section.
Fuel lines and connections – I – I – I
Fuel tank –– I –– I
EMISSION CONTROL SYSTEM
✱
PCV valve ––––– I
✱
Fuel evaporative emission control system ––––– I
NOTE:
•“R”: Replace or change
•“I”: Inspect and correct, replace or lubricate if necessary
• For Sweden, items with
✱
(asterisk) should be performed by odometer reading only.
• For spark plugs, replace every 50,000 km if the local law requires.
• Iridium spark plug: IFR6J11 (NGK)
• For camshaft timing belt (G10 engine), it may be replaced every 90,000 km (54,000 miles) according
to customer’s maintenance convenience.
To Next Page
Loading...
