7B1-170 AUTOMATIC TRANSAXLE (M13 ENGINE)
Valve body assembly
Disassembly
1) Pull out manual valve (1).
1. Pressure control solenoid valve 8. Manual valve
2. Shift solenoid valve-A (No.1) 9. Solenoid lock plate
3. Shift solenoid valve-B (No.2) 10. O-ring
4. TCC (Lock-up) solenoid valve Apply automatic transaxle fluid.
5. Timing solenoid valve Tightening torque
6. Temperature sensor clamp Do not reuse.
7. Valve body assembly
CAUTION:
When replacing pressure control solenoid valve, it is strictly required to replace it together with vale
body assembly as a set. Replacing pressure control solenoid independently may cause excessive
shift shock.
To Next Page
Loading...
