TRANSFER 7D-1
7D
SECTION 7D
TRANSFER
CONTENTS
Unit Repair Overhaul ......................................7D-2
Tightening Torque Specification ...................7D-6
Required Service Material..............................7D-7
NOTE:
• For the descriptions (items) not found in this section, refer to the same section of the Service Man-
ual mentioned in “FOREWORD” of this manual.
• The sealant SUZUKI BOND NO.1215B (99000-31110) is changed to SUZUKI BOND NO.1217G (99000-
31260). In the service manual mentioned in “FOREWORD” of this manual, it is instructed that the
sealant SUZUKI BOND No.1215B (99000-31110) should be used for the servicing of transfer. Please
apply sealant SUZUKI BOND NO.1217G (99000-31260) instead of the sealant SUZUKI BOND
No.1215B (99000-31110).
To Next Page
Loading...
