Suzuki Wagon R Plus RB310 - Front Disc Brake Caliper

FRONT BRAKE 5B-3
2) Install caliper (1) and tighten caliper pin bolts (2) to specifica-
tion.
Tightening torque
Caliper pin bolt (a): 30 N·m (3.0 kg-m, 22.0 lb-ft)
3) Tighten front wheel bolts to specification.
Tightening torque
Wheel bolt (b): 95 N·m (9.5 kg-m, 69.0 lb-ft)
4) Upon completion of installation, perform brake test.
Front Disc Brake Caliper
Installation
1) Install caliper (1) to caliper carrier (2).
2) Torque caliper pin bolts (3) to specifications.
Tightening torque
Caliper pin bolt (a): 30 N
·
m (3.0 kg-m, 22.0 lb-ft)
3) Install brake flexible hose (1) and new gaskets (3) as shown
and torque hose bolt (2) to specification.
Tightening torque
Flexible hose bolt (b): 23 N
·
m (2.3 kg-m, 17.0 lb-ft)
NOTE:
Make sure that boots (3) are fit into groove securely.
CAUTION:
Observe CAUTION at the beginning of On-Vehicle Ser-
vice.
NOTE:
Make sure that boots are fit into groove securely.