Suzuki Wagon R Plus RB310 - Transaxle Rear Cover Assembly (O;D and 2 Nd Coast Brake Piston)

AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-161
Transaxle rear cover assembly (O/D and 2nd coast brake piston)
Disassembly
1) Remove snap ring by using special tools and hydraulic
press.
Special tool
(A): 09926-96030
(B): 09946-06710
2) Remove O/D and 2nd coast brake return spring assembly.
1. Snap ring 7. Transaxle rear cover
2. O/D and 2nd coast brake return spring subassembly 8. Rear cover plug
3. O/D and 2nd coast brake piston front O-ring 9. Rear cover plug O-ring
4. O/D and 2nd coast brake piston rear O-ring Apply automatic transaxle fluid.
5. O/D and 2nd coast brake piston Do not reuse.
6. Rear cover seal ring Tightening torque
CAUTION:
Do not press O/D and 2nd coast brake return spring sub-
assembly in over 1.0 mm (0.039 in.).
Excessive compression may cause damage to O/D and
2nd coast brake return spring subassembly and/or pis-
ton.
1. Transaxle rear cover