7B1-162 AUTOMATIC TRANSAXLE (M13 ENGINE)
3) Apply compressed air (400 – 800 kPa, 4 – 8 kg/cm
2
, 57 –
113 psi) to oil hole (2) of transaxle rear cover (1) to remove
O/D and 2nd coast brake piston.
4) Remove O/D and 2nd coast brake piston front O-ring (1) and
rear O-ring (2).
5) Remove rear cover seal rings (1).
6) Remove rear cover plugs (1).
To Next Page
Loading...
