0B-8 MAINTENANCE AND LUBRICATION
Camshaft Timing Belt Replacement (G10
Engine)
Replace belt with new one. Refer to Section 6A for replacement
procedure.
Valve Lash (Clearance) Inspection (M13
Engine)
1) Inspect intake and exhaust valve lash and adjust as neces-
sary.
Refer to “Valve Lash (Clearance) Inspection” in Section 6A2
for valve lash inspection and adjustment procedure.
CAUTION:
• Do not bend or twist timing belt.
• Do not allow timing belt to come into contact with oil,
water, etc.
1. Camshaft
2. Thickness gauge