Suzuki Wagon R Plus RB310 - Page 262

ENGINE GENERAL INFORMATION AND DIAGNOSIS (M13 ENGINE) 6-2-87
6 Check TP sensor.
1) Check resistance between terminals of TP
sensor. See Fig. 2.
TP sensor resistance
Between 1 and 3: 4.0 – 6.0 k
Ω
Between 1 and 2: 0.1 – 6.5 k
Ω
Are measured values within specifications?
Substitute a known-good
ECM and recheck.
Replace TP sensor.
Step Action Yes No
[A]: Fig. 1 for Step 3
[B]: Fig. 2 for Step 6