6E2-12 ENGINE AND EMISSION CONTROL SYSTEM (M13 ENGINE)
1. CKP sensor 20. Immobilizer control module 39. Stop lamp
2. CMP sensor 21. Data link connector 40. Lighting switch
3. VSS 22. Injector No.1 41. Position lamp
4. MAP sensor 23. Injector No.2 42. Ignition switch
5. Knock sensor 24. Injector No.3 43. Main relay
6. TP sensor 25. Injector No.4 44. Immobilizer indicator lamp
7. ECT sensor 26. IAC valve 45. Starting motor
8. Heated oxygen sensor–2 27. EVAP canister purge valve 46. Shield wire
9. Heated oxygen sensor–1 28. Fuel pump relay 47. Main fuse
10. A/C evaporator outlet air temp. sensor 29. Fuel pump 48. Barometric pressure sensor
11. Battery 30. Radiator fan relay 49. Oil control valve
12. Combination meter 31. Radiator fan motor 50. Engine ground
13. ABS control module 32. EGR valve 51. Body ground
14. A/C compressor relay 33. Malfunction indicator lamp 52. Shield ground
15. Heater fan motor 34. “IG COIL” fuse 53. EPS control module
16. Heater fan switch 35. MAF and IAT sensor 54. Fuel level sensor
17. A/C compressor clutch 36. Ignition coil assembly (for No.1 and No.4 spark plugs) 55. “DOME RADIO” fuse
18. A/C switch 37. Ignition coil assembly (for No.2 and No.3 spark plugs)
19. A/C pressure switch 38. Stop lamp switch
To Next Page
Loading...
