7A2-44 MANUAL TRANSAXLE (M13 ENGINE)
Tightening Torque Specification
Fastening part
Tightening torque
N•m kg-m lb-ft
Transaxle oil level/filler and drain plugs 21 2.1 15.5
Oil gutter bolt 10 1.0 7.5
Final gear bolt 90 9.0 65.0
Reverse gear shift lever bolt 23 2.3 17.0
Transaxle case bolt 19 1.9 14.0
Reverse shaft bolt 23 2.3 17.0
Gear shift locating bolt 13 1.3 9.5
Left case plate screw and bolt 10 1.0 7.5
Countershaft nut 70 7.0 51.0
Side cover No.1 bolt 10 1.0 7.5
Side cover No.2 bolt 23 2.3 17.0
Gear shift guide case bolt 23 2.3 17.0
Gear shift interlock bolt 23 2.3 17.0
5th to reverse interlock guide bolt 23 2.3 17.0
Back up lamp switch 23 2.3 17.0
Gear shift control lever assembly mounting nut 13 1.3 9.5
Cable lock nut 5.5 0.55 4.0
Cable mounting bolt 5.5 0.55 4.0
Cable bracket bolt 50 5.0 37.5
Transaxle to engine bolt 85 8.5 63.5
Engine left mounting bracket bolt 55 5.5 42.0
Stiffener bolt 55 5.5 42.0
Engine rear mounting bolt 75 7.5 57.0
Engine rear mounting No.2 bracket bolt 55 5.5 42.0
Transaxle to engine rear mounting No.2 bracket bolt 55 5.5 42.0
Transaxle to engine nut 85 8.5 64.0
Clutch housing lower plate bolt 55 5.5 42.0
VSS bolt 5.5 0.55 4.0
To Next Page
Loading...
