Suzuki Wagon R Plus RB310 - Page 743

7B1-174 AUTOMATIC TRANSAXLE (M13 ENGINE)
Assembly
1) After applying A/T fluid to new O-rings, fit them to housing
plugs. Finally install plugs to torque converter housing.
Tightening torque
Torque converter housing plug
(a): 7.5 N·m (0.75 kg-m, 5.5 lb-ft)
2) Using special tools, assemble differential side RH bearing
cup.
Special tool
(A): 09924-74510
(B): 09944-88220
3) Using special tool, install countershaft RH bearing cup.
Special tool
(A): 09924-74510
(B): 09944-88220
a)Using special tools, install new differential side oil seal to torque
converter housing.
Special tool
(A): 09924-74510
(B): 09944-88220
Differential side oil seal installing depth
“a”: 2.6 – 3.6 mm (0.10 – 0.14 in.)
4) Apply grease to oil seal lip.
Grease 99000-25030
(A)
(B)
(B)
(A)